GBICS · Enterprise infrastructure · UAE
Enterprise Networking Optics & Connectivity in the UAE
Connect your offices, campuses and core network with the right hardware for every link.
Source SFP transceivers in Dubai, QSFP optical modules and fibre cabling for business-critical networks. GBICS helps buyers and network teams match speed, reach and equipment requirements to a clear project bill of materials.
Built around your network
Access. Aggregation. Core.Optics and cabling specified together.
1G · 10G · 25G · 40G · 100GMake every connection a confident procurement decision
A part number is only useful when it fits the port, the fibre and the project.
Specify clearly
Document equipment models, speeds and fibre routes so buyers can compare technically equivalent offers.
Check compatibility
Review vendor coding, software support and the complete optical link before selecting a replacement or upgrade.
Plan fulfilment
Request confirmation of UAE stock, dispatch timing, delivery estimates and applicable warranty terms for your order.
For IT buyers and project managers
Enterprise networking hardware for offices, campuses and branches
Build a consistent connectivity plan across new sites, infrastructure refreshes and network expansions. Select transceivers and cable assemblies around the service each link supports, while keeping room for practical upgrades.
Access switching & uplinks
Connect floor switches to distribution equipment using supported 1G, 10G or 25G uplinks. Match the uplink capacity to user demand, wireless traffic and the access switch specification.
Campus & building links
Use suitable single-mode optics for longer fibre routes between buildings. Confirm installed fibre, patch-panel connections and loss budget before selecting the reach rating.
Core & aggregation
Evaluate 40G QSFP+ and 100G QSFP28 connectivity where supported by the platform. Plan redundancy and uplink capacity together to keep failure scenarios within design limits.
Branch & WAN handoffs
Specify router and firewall optics against the service-provider handoff. Confirm the optical standard, connector and link parameters at both ends, particularly when replacing a carrier-facing module.
Server & storage access
Compare DAC, AOC and pluggable optics for Ethernet server and storage links. Fibre Channel requires protocol-compatible components; an Ethernet speed label does not establish Fibre Channel support.
Wireless & IP device networks
Plan fibre uplinks alongside copper access for wireless APs, cameras and phones. Select switches with suitable PoE capability and total power budget; optical transceivers do not deliver PoE over fibre.
For network engineers
SFP, SFP+ & QSFP optical modules: technical comparison
Use this reference to shortlist an optical link type. Reach depends on the selected module, fibre specification and channel conditions. These are representative specifications, not a stock list or a guarantee that every host supports every module.
| Form factor / optical type | Data rate | Maximum listed distance | Fibre type | Wavelength | Connector | Compatibility requirement |
|---|---|---|---|---|---|---|
| SFP / 1000BASE-SX | 1G | Up to 550 m on specified 50 µm MMF | MMF | 850 nm | Duplex LC | Exact host, software and port review |
| SFP / LX/LH implementation | 1G | Up to 10 km on SMF¹ | SMF | 1310 nm | Duplex LC | Exact host, software and port review |
| SFP+ / 10GBASE-SR | 10G | 300 m OM3 / 400 m OM4 | MMF | 850 nm | Duplex LC | Exact host, software and port review |
| SFP+ / 10GBASE-LR | 10G | 10 km | SMF | 1310 nm | Duplex LC | Exact host, software and port review |
| SFP28 / 25GBASE-SR | 25G | 70 m OM3 / 100 m OM4 | MMF | 850 nm | Duplex LC | Exact host, software and port review |
| QSFP+ / 40GBASE-SR4 | 40G | 100 m OM3 / 150 m OM4 | MMF | 850 nm | MPO-12 | Exact host, software and port review |
| QSFP28 / 100GBASE-SR4 | 100G | 70 m OM3 / 100 m OM4 | MMF | 850 nm | MPO-12 | Exact host, software and port review |
| QSFP28 / 100GBASE-LR4 | 100G | 10 km | SMF | 4 LAN-WDM channels near 1310 nm | Duplex LC | Exact host, software and port review |
¹ The 10 km value describes a representative LX/LH product implementation; it should not be assumed for every IEEE 1000BASE-LX module. SX reach also varies with fibre core size and modal bandwidth. MMF = multimode fibre; SMF = single-mode fibre.
Confirm the exact part number, operating temperature, supported FEC mode, optical power limits and host software before ordering. Check receiver overload as well as sensitivity; a longer-reach optic is not automatically a suitable replacement for a short link.
Uplink capacity: compare nominal line rates
These bars compare common Ethernet port speeds on a linear scale. They show nominal line rate, not measured throughput, latency or application performance.
Size uplinks around demand and failure conditions
For illustration, 48 × 1G access ports have 48 Gb/s of aggregate nominal access capacity. One 10G uplink gives a nominal 4.8:1 access-to-uplink ratio. Two active 10G uplinks give 2.4:1 in aggregate, but traffic distribution and link failure affect usable capacity. A single flow generally remains limited by one member link under conventional flow-based aggregation.
Compatibility before commitment
OEM-compatible transceivers: verify the host and the link
For Cisco, HPE Aruba, Juniper, Arista, Dell, Huawei or Fortinet requirements, send the exact equipment model and software version. A vendor name or matching form factor alone cannot establish compatibility. OEM coding helps the host identify the module; electrical, optical and software requirements must still align.
| Check | Provide | Why it matters |
|---|---|---|
| Host platform | Device model, line card and software release | Module support can differ by port and software version. |
| Port configuration | Speed, breakout mode and FEC requirements | Mechanical fit does not establish electrical interoperability. |
| Optical channel | Standard, distance, fibre and connector details | Endpoints must match the optical interface and channel budget. |
| Environment | Temperature range and module power limits | Thermal and electrical limits affect suitability. |
| Acceptance | Required diagnostics and test evidence | Defines what must be checked before deployment approval. |
Review checklist only; no brand-level pass/fail compatibility is implied. Vendor names identify equipment requirements and do not imply authorized reseller status.
Request a compatibility reviewChoose cabling that matches the optical standard
Duplex LC fibre
Specify fibre grade, length, connector polish and polarity. LC is a connector format, not a speed rating: suitability depends on the selected optics and the complete fibre channel.
MPO / MTP assemblies
For parallel optics, confirm fibre count, active fibre positions, polarity, connector gender and polish. MTP is a branded MPO implementation; the complete assembly must match the port specification.
DAC & AOC cables
For short equipment links, verify both endpoints, supported length and vendor coding. Choose passive or active DAC and AOC according to the host's supported cable options.
Build a practical migration plan
- Audit the installed network. Record switch models, software, port use, fibre grade, connector types and route distances.
- Define the target service. Identify expected traffic, uplink capacity, resilience requirements and future port growth.
- Review reusable infrastructure. Check whether existing fibre and patch panels support the new optical standard and loss budget.
- Validate a representative link. Confirm host recognition, stable link state, optical diagnostics where supported and error counters under agreed traffic conditions.
- Prepare the rollout. Align approved part numbers, spare quantities, maintenance windows and delivery schedules.
Procurement support for UAE networking projects
Bring GBICS a single BOQ for optical modules, patch leads, DAC/AOC assemblies and related networking requirements. Ask for itemised part numbers, compatibility assumptions, quantities, lead times and applicable warranty terms so technical and purchasing teams approve the same specification.
GBICS advertises UAE stock, same-day dispatch and lifetime warranty. Availability and coverage should be confirmed per quoted item. For projects in Dubai, Abu Dhabi, Sharjah or elsewhere in the UAE, include the delivery location and required arrival date.
For AI fabric and high-speed data centre requirements, explore the AI & Data Centre solution.
Enterprise Networking FAQs
What enterprise networking products can I source from GBICS?
GBICS lists optical transceivers, DAC and AOC cables, media converters, network adapters and network switches. Share your bill of quantities to confirm available models, compatible alternatives, stock and delivery for your project.
How do I choose between SFP, SFP+, SFP28 and QSFP?
Start with the host port and required speed. Common Ethernet options include 1G SFP, 10G SFP+, 25G SFP28, 40G QSFP+ and 100G QSFP28. Matching the physical size alone is insufficient; confirm host support, optical standard, software and port configuration.
Will a Cisco-compatible SFP work in every Cisco switch?
No. Compatibility must be checked against the exact switch or router model, software release and port mode. EEPROM coding does not guarantee universal support. Provide both endpoint models before ordering.
Should I choose multimode or single-mode fibre?
Multimode fibre is commonly used for shorter links with SR optics. Single-mode fibre supports longer links with suitable optics such as LR. Select the optical standard, fibre grade and distance together, then check the complete channel loss budget.
Can I reuse LC cabling when upgrading from 10G to 100G?
Sometimes. Reuse depends on the fibre type, link length, loss budget and selected optical standard. Conventional 100G SR4 uses parallel MPO cabling, while 100G LR4 uses duplex single-mode LC. Some other 100G implementations use duplex multimode LC; verify the exact module specification.
Do SFP fibre links provide Power over Ethernet?
No. An optical fibre link carries data and does not supply PoE power to the remote device. Wireless access points, cameras and phones require a suitable powered copper port or another local power source. Check per-port PoE requirements and the switch total power budget.
What are the warranty and delivery options in the UAE?
GBICS advertises UAE stock, same-day dispatch and lifetime warranty. Confirm stock, order cutoff, destination delivery estimate and the warranty terms applying to each selected item. Dispatch and arrival are different milestones.
How do I request a quote for enterprise networking hardware?
Email store@gbics.ae with your company name, equipment models, software versions, required speeds, link distances, fibre details, quantities and delivery location. Attach a BOQ and deployment schedule if available.
From specification to supply
Get a custom enterprise networking quote
Share your switch models, optical speeds, fibre routes and quantities. Request a clear proposal covering suitable part numbers, compatibility requirements, UAE stock and delivery options.
Request your enterprise quoteEmail store@gbics.ae and attach your BOQ.